B8793
Instructions
Please keep this instruction sheet for future reference,
as it contains important information.
Requires three “C” batteries (included).
Adult assembly is required for battery replacement.
Tool required for battery replacement:
Phillips screwdriver (not included).
w
™
Soothe & Amuse Crib Mirror
Battery Replacement
For best performance, we recommend replacing the batteries that came with
this toy with three, new alkaline “C” (LR14) batteries.
Battery
Compartment
Door
Back View
•Locate the battery compartment on the back of the toy.
•Loosen the screws in the battery compartment door with a Phillips screwdriver.
Remove the battery compartment door.
•Insert three “C” (LR14) alkaline batteries.
Hint: We recommend using alkaline batteries for longer life.
•Replace the battery compartment door and tighten the screws with a Phillips
screwdriver. Do not over-tighten.
•When sounds or lights from this toy become faint or stop, it’s time for an adult
to change the batteries!
Fisher-Price, Inc., a subsidiary of Mattel, Inc., East Aurora, NY 14052 U.S.A.
©2003 Mattel, Inc. All Rights Reserved. ® and ™ designate U.S. trademarks of Mattel, Inc.
Printed in China
B8793pr-0920
3
Battery Safety Information
1.5V x 3
“C” (LR14)
Shown Actual Size
Batteries may leak fluids that can cause a chemical burn injury or ruin your toy.
To avoid battery leakage:
•Do not mix old and new batteries or batteries of different types: alkaline,
standard (carbon-zinc) or rechargeable (nickel-cadmium).
•Insert batteries as indicated on the battery compartment door.
•Remove batteries during long periods of non-use. Always remove exhausted
batteries from the toy. Dispose of batteries safely. Do not dispose of batteries
in a fire. The batteries may explode or leak.
•Never short-circuit the battery terminals.
•Use only batteries of the same or equivalent type, as recommended.
•Do not charge non-rechargeable batteries.
•Remove rechargeable batteries from the toy before charging.
•If removable, rechargeable batteries are used, they are only to be charged
under adult supervision.
4
Gentle Music or Upbeat Tunes!
Mode Switch
Mode Switch
Mode Switch
(ON TOP OF TOY)
Volume Switch
(ON BACK OF TOY)
Pull Down
Press
Spin
Spin
•To change modes, slide the switch to one of the three positions:
soothe ; amuse ; or off
.
I
II
o
•Set the volume switch on the back of the toy to low or high volume.
Hint: If your child is not actively playing with this toy, it turns off
automatically (sleep mode).
•When your child is finished with this toy, slide the mode switch to the
off position
.
o
Soothe Mode
•Slide the mode switch to the soothe position .
I
•Mom can press the triangle button to active
10 minutes of calming music, soft lights and
a soothing rotating spiral.
Mode Switch
Mode Switch
Amuse Mode
•Slide the mode switch to the amuse position
•Baby can press the triangle button for lights,
upbeat music and a shiny spinning spiral.
.
II
5
Care
•Wipe this toy with a clean cloth dampened with a mild soap and water solution.
•Do not immerse this toy.
Consumer Information
Questions? We'd like to hear from you!
®
Call Fisher-Price Consumer Relations, toll-free at 1-800-432-5437, 8 AM - 6 PM EST
Monday through Friday. Hearing-impaired consumers using TTY/TDD equipment,
®
please call 1-800-382-7470. Or, write to: Fisher-Price Consumer Relations,
636 Girard Avenue, East Aurora, New York 14052.
FCC Note (United States Only)
Note: This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equip-
ment does cause harmful interference to radio or television reception, which can
be determined by turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Consult the dealer or an experienced radio/TV technician for help.
Note: Changes or modifications not expressly approved by the manufacturer
responsible for compliance could void the user’s authority to operate the equipment.
For countries outside the United States:
CANADA Questions? 1-800-567-7724. Mattel Canada Inc., 6155 Freemont Blvd., Mississauga, Ontario L5R 3W2.
GREAT BRITAIN Mattel UK Ltd, Vanwall Business Park, Maidenhead SL6 4UB. Helpline: 01628 500302.
AUSTRALIA Mattel Australia Pty. Ltd., 658 Church Street, Locked Bag #870, Richmond, Victoria 3121 Australia.
Consumer Advisory Service 1300 135 312.
NEW ZEALAND 16-18 William Pickering Drive, Albany 1331, Auckland.
ASIA Mattel East Asia Ltd, Room 1106, South Tower, World Finance Centre, Harbour City, Tsimshatsui, HK, China.
6
|